Installing your new shelf or wall MEDALMOUNT

Recommended equipment:

Screws, spacers, wall plugs and instructions are all included with your new MedalMount.

Instructions

	1. Work out the perfect wall location using the tape measure. Hold the MedalMount in position using the spirit level to ensure it is straight. Mark the holes that need to be drilled using the pencil.
	2. Using a 5mm wide drill bit, drill the required pencil-marked holes to 25mm deep. If you are fixing to a wooden surface (such as shelves or cupboards), use a 2mm drill bit and skip step 3.
	3. Insert the wall plugs into the holes and push in until flush with the wall.
	4. Place the screws into the holes on your MedalMount, pop the nylon spacers onto the screws and then into the wall plugs, fixing your new MedalMount to the wall.
	5. Then simply tighten with the screwdriver.
Hang your medals on your new MedalMount, admire it, then take a picture and send it to us or share it on social media using #medalmounts! If you have any questions please contact us and we will be more than happy to help!